®
Pet Hair Eraser
C O R D E D H A N D V A C U U M
U S E R ’ S G U I D E
3 3 A 1 S E R I E S
3
Safety Instructions
4
Product View
4
Assembly
4-5
Operations
6
Maintenance and Care
6-7
Troubleshooting
7
Consumer Services
7
Replacement Parts
8
Warranty
ug110-4040_33A1_608.indd
1
6/24/08 9:41:28 AM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
■ Turn off all controls before plugging or unplugging
vacuum cleaner.
■ Use extra care when cleaning stairs.
■ Do not pick up flammable materials (lighter fluid,
gasoline, kerosene, etc.) or use in the presence of
explosive liquids or vapors.
READ All InStRUctIonS
bEfoRE USInG yoUR
HAnD VAcUUM.
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
■ Do not use hand vacuum cleaner in an enclosed
space filled with vapors given off by oil base paint,
paint thinner, some moth proofing substances,
flammable dust, or other explosive or toxic vapors.
Always connect to a polarized outlet (left slot is wider
than right). Unplug from outlet when not in use and
before conducting maintenance.
■ Do not pick up hard or sharp objects such as
glass, nails, screws, coins, etc.
WARnInG:to reduce
■ Do not pick up anything that is burning or smoking,
the risk of fire, electric shock,
such as cigarettes, matches, or hot ashes.
or injury:
■ Do not use without filters in place.
■ Use only on dry, indoor surfaces.
■ Keep appliance on a level surface.
■ Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
■ Do not leave hand vacuum cleaner unattended
when it is plugged in.
SAVE tHESE
InStRUctIonS foR
fUtURE USE
■ Unplug from outlet when not in use and
before servicing.
■ Unplug before attaching the nozzles.
■ Do not use outdoors or on wet surfaces.
■ Do not allow children to operate vacuum
cleaner or use as a toy.
■ Close attention is necessary when used by or
tHIS APPlIAncE
HAS A PolARIZED
PlUG.
near children.
■ Do not use for any purpose other than described in
this user’s guide.
■ Use only manufacturer’s recommended
attachments.
To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a proper outlet.
Do not change the plug in any way.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, have it repaired at an authorized
service center.
■ Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.
This model is for household use only.
■ Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
■ Do not handle hand vacuum cleaner or plug with
wet hands.
■ Do not put any object into openings. Do not use with
any opening blocked; keep openings free of dust,
lint, hair, and anything that may reduce air flow.
■ Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts.
3
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug110-4040_33A1_608.indd
3
6/24/08 9:41:28 AM
Product view
Handle
Power Switch
Dirt Container
Release Latch
Dirt Container
Nozzle Release
Button
Flexible Rubber
Contour Nozzle
16ft. Power Cord with
Cord Wrap System
Filter Screen
HEPA Media
Filter
Exhaust
Assembly
your unit will come assembled and will require
no tools to put together.
Operations
Power switch
the power switch is located on the end of the curved
handle.
to turn hand vacuum on ( I ), press up.
to turn hand vacuum off ( 0 ), press down.
2.
cleaning with hard nozzle
1. Turn hand vacuum OFF.
2. Remove flexible rubber nozzle by pressing
down on round nozzle release button.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
4
ug110-4040_33A1_608.indd
4
6/24/08 9:41:29 AM
Operations
cleaning with hard nozzle
3.
2.
3. Replace with hard nozzle by lining up the
bottom of nozzle to the bottom of the dirt
container. Pivot upwards to snap into place.
4. Make sure the nozzle has snapped securely
into place before using.
cleaning with flexible rubber contour nozzle
1. Turn hand vacuum OFF.
3.
2. Remove hard nozzle by pressing down on
round nozzle release button.
3. Replacewithflexiblerubbercontournozzlebylining
up the bottom of nozzle to the bottom of the dirt
container. Pivot upwards until it snaps into place.
4. Make sure the nozzle has snapped securely
into place before using
Emptying the dirt container
Empty the dirt container after each use. A
full dirt container may reduce suction or
performance of vacuum.
1. Turn hand vacuum OFF.
2. Unplug hand vacuum from electrical outlet.
3. Press dirt container release latch down to
disconnect dirt container and filter assembly
from the unit.
AttEntIon:
for best performance,
dirt container and filter
assembly should be
cleaned after every use.
4. Remove filter by grasping tabs on both sides
of filter frame and pulling away from the dirt
container. For best results, periodically tap
filter assembly against trash can to remove
dirt that has collected on the screen and
filter.
3.
4.
6.
5. Empty dirt into trash can.
6. Replace filter assembly by aligning side
labeled “TOP” into top of dirt container.
Grasp filter tabs and press firmly to ensure
filter assembly is secure in dirt container.
5.
7.
notE: Make sure side of filter assembly
labeled "toP" faces outward when inserting
filter assembly into dirt container.
7. Reattach dirt container to unit by aligning
bottom of dirt container to bottom of unit.
Pivot upwards and snap into place. Use one
hand to hold the unit and use the other hand
to clip the dirt container securely in place.
5
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug110-4040_33A1_608.indd
5
6/24/08 9:41:29 AM
Maintenance and care
cleaning the filter and screen
4.
1. Turn hand vacuum OFF.
2. Unplug hand vacuum from electrical outlet.
3. Press dirt container release latch down to discon-
nect dirt container and filter assembly from the unit.
4. Remove filter by grasping tabs on both sides of
5.
6.
5a.
filter frame and pulling away from the dirt container.
5. Separate filter assembly by grasping tabs
on both sides of assembly and pull. For best
results, periodically tap filter and screen
against trash can to remove dirt that has
collected on the screen and filter.
6. Reconnect filter and screen by aligning
rectangular tab on filter with insert on screen.
Press together to ensure assembly is secure.
7. See page 5 to reattach dirt container.
notE: Dirt container and screen may be
rinsed with cold water. Ensure both are dry
before reinserting.
Do not wash or rinse pleated filter.
Storage/cord wrap system
A wrap is always attached to the cord for quick
and easy storage.
Insert
Tab
1. To store the unit, turn hand vacuum OFF.
2. Unplug hand vacuum from electrical outlet.
3. Bundle cord, using wrap that is located on
cord, to store.
nozzle Maintenance
Keep nozzles clean and free of debris.
1. Wipe nozzles clean with damp cloth.
Troubleshooting
Hand vacuum won’t turn on
Possible causes
Remedies
1. Power cord not plugged in
2. Blown fuse/tripped breaker in home
1. Check electrical plug
2. Check/replace fuse or reset breaker
Hand Vacuum won’t pick up or low suction
Possible causes
Remedies
1. Dirt container not installed properly
1. Check assembly of dirt container making
sure it is snapped in
2. Dirt container is full
2. Empty dirt container and reattach
3. See instructions above. Replace filter if needed
4. Wipe tools clean with damp cloth
3. Filter or screen is dirty
4. Nozzles are clogged with debris
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
6
ug110-4040_33A1_608.indd
6
6/24/08 9:41:30 AM
Troubleshooting
other maintenance or service not included in the manual should be performed by an
authorized service representative.
thank you for selecting a bISSEll product.
Please do not return this product to the store.
for any questions or concerns, bISSEll is happy to be of service.
contact us directly at 1-800-237-7691.
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
bISSEll consumer Services
1-800-237-7691
Monday - Friday
Saturday
Or write:
8 a.m. — 10 p.m. ET
9 a.m. — 8 p.m. ET
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
notE: Please keep your original sales receipt. It provides proof of purchase date in the event of
a warranty claim. See Warranty on page 8 for details.
Replacement parts - BISSELL vacuum
Item
1
Part no.
97D5
Part name
HEPA Media Filter Assembly
2
3
203-1408
203-1409
Flexible Rubber Contour Nozzle
Hard Nozzle
1
2
3
7
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
ug110-4040_33A1_608.indd
7
6/24/08 9:41:30 AM
Warranty - BISSELL Pet Hair Eraser® Corded Hand Vacuum
This warranty gives you specific legal rights, and you may also have other rights which may vary from state
to state. If you need additional instruction regarding this warranty or have questions regarding what it may
cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
limited one year Warranty
Subject to the *EXcEPtIonS AnD EXclUSIonS identified below, upon receipt of the product BISSELL
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s
option, free of charge from the date of purchase by the original purchaser, for one year any defective or
malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not
apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused
by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is
not covered.
If your bISSEll product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty,
contact BISSELL Consumer Services.
Website or E-mail:
Use the “Customer Services” tab.
or call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET
or Write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE
USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
*EXcEPtIonS AnD EXclUSIonS fRoM tHE tERMS of tHE lIMItED WARRAnty
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER
ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
©2008 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in Korea
Part Number 110-4040
Some states do not allow limitations on how long an implied warranty last so the
above limitation may not apply to you.
Rev 6/08
Visit our website at:
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
8
ug110-4040_33A1_608.indd
8
6/24/08 9:41:30 AM
|